Day: March 2, 2021

What to Do If Your Child Has a High Temperature Or FeverWhat to Do If Your Child Has a High Temperature Or Fever

A fever can be a good thing. Your child’s body is fighting an infection, but a fever can also be a sign of an illness. If your child is waking up with a fever, you may not know what to do. You can use a thermometer to determine the cause of your child’s temperature and decide whether or not to take your child to the doctor.

First, you should keep your child warm and dressed in breathable, lightweight clothing. Keep the child covered with a sheet or blanket. For infants, a baby can take acetaminophen or ibuprofen, but avoid giving them aspirin or other pain killers. If your child has a fever that lasts more than eight hours, it is best to visit the doctor.

Next, you should try to provide rehydration fluids for your child. These can be purchased at supermarkets or pharmacies. It is best to give smaller doses more often. If your child has a fever for more than 48 hours, they should see their GP. Make sure your child wears light clothing to keep the body cool. One layer less is appropriate. The temperature of your child can rise and fall quickly, so you should check them regularly to ensure that they stay hydrated.

You should avoid the risk of catching a disease from your child if you can’t tell the cause. While a fever can be uncomfortable for you and your child, it is not necessarily dangerous. If your child has a high temperature or fever, don’t over-dress them as this will only trap body heat, making their temperature higher. Instead, keep the child covered up in a light blanket or sleep sack until they are fever-free for at least 48 hours. However, if your child is suffering from an illness that is serious enough to require treatment, it is a good idea to see a doctor.

The first thing to do if your child has a fever is to keep your child as comfortable as possible. You can keep them in diapers or a t-shirt. If your child has a fever, a warm wet towel can be applied to their forehead to relieve the discomfort. Do not give cold baths or apply alcohol to their skin, as this can have harmful side effects. https://babynamesdiary.com/

A fever is a very serious condition that should be treated as soon as possible. The temperature is defined as a number higher than 100.4 degrees Fahrenheit. In addition to treating the fever, the child should drink plenty of fluids. If they have diarrhea, you should consult a pediatrician immediately. If your child is experiencing a high-grade fever, you should take her to the doctor for further evaluation.

If your child is not feeling well, it is best to contact a pediatrician. However, if your child has a fever that’s higher than 100.4 degrees, you should follow the instructions on the label. If your child is vomiting or dehydrated, do not take acetaminophen or ibuprofen. Alternatively, you can give acetaminophen, but be sure to check the temperature first.

In general, a fever is an indication that your child has an infection. If the temperature has been higher than 108 degrees for more than 24 hours, you should seek medical care. It is important not to reduce a fever unless it is causing your child pain or discomfort. You should monitor your child’s temperature and acetaminophen dosage as directed by your doctor. https://www.i-rama.com/members/heavenhouse4/

A fever is a warning sign that your child is suffering from an illness. While it is important to visit the doctor if your child has a fever, you should make sure that the fever does not last longer than three to five days. If the temperature rises above that point, consult your pediatrician. If your child has a high temperature or a fever, you should keep him or her home as comfortable as possible.

Are Garden Timber Cabins Waterproofed?Are Garden Timber Cabins Waterproofed?

Are garden log cabins waterproofed is a query we got asked all the time here at Timberdise .

The very short simple answer to your question is an unqualified yes!

Why would they not be?

Well, let’s take a look at some of the plausible complications with a timber cabin which would make the log cabin not waterproofed and fairly honestly not fit for purpose.The main thing to look at right away is the roof structure, that’s where you would imagine the main trouble would begin (this is not always the case but that’s where we will begin today). The main trouble with the roof structure would be to have the felt or roof shingles to not be installed appropriately. This is fairly easily done if this is something you have never done before and why it should always be tackled by a qualified professional especially if you are spending a lot of your hard earned cash on a timber cabin.

• Make certain that the overlies are overliing in the ideal way. You should always begin felting at the bottom of the structure and felt upwards. By doing this you ensure that the felt overlies on top of the piece of felt that is further down the roof structure. This will ensure there is a natural run off of the water, if you begin felting at the top of the roof structure and you put the overlie from the bottom pieces over the top of the felt higher up when the rain works off it will run beneath the felt and consequently create a leak. This is just exactly the same when doing shingles, make certain you place from bottom upwards.

• Make certain the overlies of the felt/shingles are fairly generous. You don’t want them to be just barely overliing because this could create rainwater to get between the felt sheets and this will create a leak

• Make certain you use plenty of felt nails. Ideally you want to be spacing the felt nails around 6 inches apart from each other. Always do this on both sides of the felt and dependent on the quality of the felt you are using possibly put another row of pin in the middle,possibly two rows but again this depends on the quality of the felt. Failure to put enough felt pin in there could result in the felt blowing off during a bad storm which would then leave your structure exposed to water leaks.

• It is also crucial that when you reach the overhang of the structure with the felt you attach the felt to side of the roof structure but DO NOT tuck the felt beneath the overhang of the roof structure as this limits the natural run off of the water. This can create early rotting of the structure and in some situations create the roof structure to leakage around the top corners of the structure as water could build up.

• Make certain you use the right size fixings. If the roof boards on your structure are let’s say 10mm, you don’t want felt nails of 16mm. Doing this would create the felt nails to come completely through the roof structure. This would not look cosmetically pleasing and would also be a real chance of a leak in the structure. They way felt is now designed,there should be a watertight seal around the nail but throughout the seasons with wear and tear this may fail resulting in a leak.

• The most generally neglected area on a timber cabin structure is the felt or shingles on the roof structure. This is typically because we can’t see it most of the time and it’s a lot more difficult to get up there and have a look,but this is just exactly what you should do and I would recommend at least once a year or if you notice a leak. Because log cabins are not built as high as the normal house and the felt and shingles aren’t fairly as tough and resilient as a typical house tile they require a little more focus. They are exposed to more elements on a daily basis because they are lower, this can result in a number of things from falling debris from trees, or another instance would be a kids’s toys getting thrown up there which would all create harm to the felt/shingles. Not to mention lots of bird excrement can rot the felt if it is in an area where natural rainwater can not pass through it to create a natural run off and cleaning system (for instance if your log cabin sits under a plant).

Timberdise place all of our log cabins, we do this because we know you are investing a lot of cash into a timber cabin and you want it to be around for a long period of time. So the best way we can ensure this takes place is to take care of the installation and make certain it is installed appropriately. We’ve been out to repair log cabins in the past built by non-skilled people and if the structure is not put together appropriately then number one it won’t be safe but also it could create a failure in the structure to be waterproofed.

A prime instance of this would be that the timbers haven’t been constructed appropriately on the walls. This would then create the log cabin to differ from the design as it was intended to be. At this point when the roof structure was installed there might be voids between the roof structure and the wall. Voids could also appear on the walls of the log cabins themselves and in some situations if the initial build of the log cabin was so bad you would have no choice but to take down the log cabin and reconstruct it.

This is why Timberdise place all of our log cabins so you don’t have this to worry about. As you can imagine if there is a gap in the wall or a gap between the roof structure and the wall this would leave the cabin open and it would most definitely leakage which is what we want to avoid at all costs.

I also want to bring focus to the flooring a second. Having your log cabin installed on a proper ground base is a must. That could be a Timberdise ground base,concrete base or a paved area. As long as they’re flat, level and solid you should be ok. Be mindful of where you put the cabin,don’t put it any place that is at risk of flooding as just like the house that you live in. If the water level rises and there is no escape for it then the log cabin will flood,that is regardless of how thick and tight your timbers are.

Lastly let’s talk about sealants around the windows and doors. Make certain after you have treated your cabin you fit the relevant sealants around the doors and the windows. The cabins don’t come with these fitted as standard, this is so you can treat the cabin first and then apply the sealants afterwards. By not fitting the doors and windows with sealants then there’s a chance rainwater could pass through the inside of the cabin, which again is easily fixed by applying sealants.

In addition, sometimes especially during the winter months, condensation can materialize inside a log cabin. This is normal due to the cabins not having any insulation fitted, it is not a leak and can be fairly normal. We encourage at Timberdise to get a dehumidifier if you have electric access in there and leave it running during the chillier months. This will help take water out of the air and further increase the life-span of your cabin.

If you comply with all the above strategies you should have a leak free cabin for the duration of its life-span which can supply indefinite fulfillment and relaxation. Bear in mind prevention is better than the cure.